3D cardboard puzzle-sculpture Dragon
A dragon with horns on their own rods – the only model here that reaches into open air
Specifications
| Material | Cardboard |
|---|---|
| Dimensions | 20 × 11 × 17.5 cm |
| Pieces | 94 |
| Recommended age | 14+ |
| Made in | Ukraine |
Shipping
Every order ships from our fulfilment centre in France – never dropshipping. Orders are dispatched within 24 hours on working days; order before 10:30 and it leaves the same day. You’ll receive your tracking number by email at dispatch.
France: 2–4 working days – free home delivery from €40.
Rest of Europe: 2–10 working days, depending on destination.
Returns
You have 14 days from delivery to change your mind – no reason needed. Write to us first at info@creatifwood.com, then send the product back unused, in its original packaging.
Return shipping is at your charge; we refund the full order amount within 14 days, to your original payment method.
Received a damaged or wrong item? Contact us within 14 days with photos – we’ll make it right.
About this product
Horns that leave the block
A dragon's head and neck, jaw closed, with two ridged horns sweeping back and up beyond the outline of the head. They are the only part of any model in this range that projects into open air rather than sitting within the mass.
The neck below carries a ridge of scutes running down the centre, so the sculpture has a spine that the animal heads do not.
The horns are built separately
They thread onto their own short rods rather than continuing the main stack, which is why they can project as far as they do. Assemble them at the end, once the head is complete and can support them.
They are also the pieces to be careful with. A cardboard horn is thin at the tip and takes a knock badly.
The build
Ninety-four pieces, an hour and a half or so. Fewer pieces than the animal heads but a slightly more involved assembly because of the separate horn stacks.
Finished
20 × 11 × 17.5 cm, one of the tallest models in the range. Narrow front-to-back and tall, so it suits a shelf edge where a cubic model would need depth.
Our craftsmanship
Made by our family, piece by piece
Every creatifwood piece starts as natural wood in our family workshop. We cut, sand and finish each item by hand, check every detail ourselves, and pack it ready to gift. No production lines, no shortcuts – just a small family that loves working with wood, and takes it personally that your piece arrives perfect.
Meet our family workshop