Gentle Rabbit Wooden Puzzle
A crouched rabbit full of smaller rabbits – 122 pieces, with a carrot hidden in the cut
Specifications
| Material | Wood |
|---|---|
| Dimensions | 32 × 25 cm |
| Thickness | 4 mm |
| Pieces | 122 |
| Recommended age | 14+ |
| Made in | Ukraine |
Shipping
Every order ships from our fulfilment centre in France – never dropshipping. Orders are dispatched within 24 hours on working days; order before 10:30 and it leaves the same day. You’ll receive your tracking number by email at dispatch.
France: 2–4 working days – free home delivery from €40.
Rest of Europe: 2–10 working days, depending on destination.
Returns
You have 14 days from delivery to change your mind – no reason needed. Write to us first at info@creatifwood.com, then send the product back unused, in its original packaging.
Return shipping is at your charge; we refund the full order amount within 14 days, to your original payment method.
Received a damaged or wrong item? Contact us within 14 days with photos – we’ll make it right.
About this product
A rabbit crouched, ears back
The animal is shown in profile, low to the ground with its ears laid along its back, which is the posture a rabbit takes when it is watching rather than fleeing. The palette is warm almost throughout: gold, ochre, rust and olive, with darker rust along the haunch.
It is one of the widest boards in this group at 32 × 25 cm, and the low crouched pose uses all of that width.
Rabbits inside the rabbit
The figural pieces keep to the subject: smaller rabbits in several poses, sitting, running, ears up, ears down. Among them sit leaves, a carrot, and a pair of what can only be painted eggs.
They are spread across the back and haunch rather than clustered, so the board empties gradually as you lift them out, and the half-built puzzle reads as a rabbit full of rabbit-shaped holes.
Where the difficulty concentrates
The haunch. It is the largest single area on the board, worked in dotted rust ornament that repeats at a small scale, and there is no line running through it to break it up.
The face and the ear tips are the opposite: the eye is a hard dark shape and the ears carry long directional strokes, both of which place immediately.
Where to start
The eye, then the ears along the back, then work down into the body. Leave the haunch until the outline is closed on both sides of it.
Our craftsmanship
Made by our family, piece by piece
Every creatifwood puzzle starts as a sheet of birch plywood in our family workshop. We laser-cut every piece into its own shape – no two are alike – check each set by hand, and pack it in a gift-ready box. No production lines, no shortcuts – just a small family that loves working with wood, and takes it personally that your puzzle brings people together around the table.
Meet the family behind your puzzleFrequently asked questions
Why does this puzzle have no straight edges?
The outline follows the shape of the design itself, so the usual approach of building the border first does not apply. Most people start from the area with the strongest contrast – in animal designs, usually the eye – and work outward from there.
What are the animal-shaped pieces for?
They are called whimsy pieces, a tradition that goes back to Victorian puzzle cutters who added recognisable shapes on a whim while working. Parker Brothers made it a standard in 1908. They do not interlock the way ordinary pieces do, so the pieces around them hold them in place.
Is this harder than a cardboard puzzle of the same size?
Yes, for three reasons. There is no straight border to anchor from, the ornamental patterning repeats so colour sorting barely helps, and the piece shapes are irregular rather than a uniform knob-and-socket grid.
How long will it take?
Honestly: longer than you expect. With no border to anchor from, repeating ornament and irregular pieces, a wooden puzzle takes noticeably longer than a cardboard one with the same count. We think that is part of the pleasure – it is made to be savoured, not raced.
Can I glue it and hang it on the wall?
Yes. Use a glue made for puzzles rather than a general craft adhesive: it runs into the joints and dries as a thin clear film that protects the face. We stock the Cléo'Puzzle glue-varnish, rated for cardboard, wood and MDF, with a precision nozzle for boards that have no straight edges. Work in thin coats and let each one dry. Gluing is permanent – if you would rather rebuild the puzzle one day, or keep the front matt, dry adhesive film on the back is the alternative. Once sealed, the board can be framed or hung as it is.
Why does it smell of wood when I open the box?
Laser cutting leaves a light trace of scorching on the edges. We clean the pieces before packing, but a faint smell of cut wood in the first days is normal and fades.
Which age is it suitable for?
It is shown on each product page under Specifications. Most designs in this range are marked 14+, and a few simpler ones are suitable from 3.
What if a piece is missing or broken?
Write to us with a photo and we will send a replacement. Details are on our Missing Pieces page.